The UFTP authentication service ("Auth server") is a simple HTTP-based service for authenticating users and initiating UFTP transfers. It is indended to be used with a standalone UFTP client and provides access to one or more UFTPD servers.

Besides data transfer via UFTP and data management features like ls, the Auth server also provides REST services for data sharing and accessing shared data sets.

The Auth server is based on the UNICORE Services Environment, and all usual UNICORE features and security configuration options are available as well. For example, the Auth server can be deployed behind a UNICORE Gateway, or it can be configured to use Unity for authenticating users.

This manual focuses on the configuration items specific to the Auth server. If you need more in-depth information on general configuration issues, please refer to the UNICORE/X manual, available via

1. Installation

1.1. Prerequisites

The Auth server should be run as a non-root user (e.g. unicore).

It requires

  • Java 1.8

  • an installed UFTPD server (2.6.0 or later)

The Auth server needs an X.509 certificate and truststore for communicating with UFTPD.

Users must be able to access the Auth server’s https port. It is possible to deploy the Auth server behind a UNICORE Gateway.

The UFTP Auth service comes with all required scripts and config files to be run standalone. To install, unzip the downloaded package into a directory of your choice.


You can run the service in an existing UNICORE/X server Please see [auth_uxdeploy] below for details.

1.2. Basic server configuration (memory etc)

The configuration file contains basic settings such as the Java command, JVM memory etc. Please review it.

The Auth server host and port are configured in the wsrflite.xml configuration file:

  <!-- example host and port -->
  <property name="" value=""/>
  <property name="container.port" value="9000"/>

  <!-- if running behind a UNICORE Gateway or a NAT router,
       set the baseurl -->
  <property name="container.sitename" value="AUTH"/>
  <property name="container.baseurl" value=""/>

Also in the wsrflite.xml configuration file, the server’s X.509 private key and the truststore settings need to be configured.

1.3. Starting and stopping the service

Use the shell scripts in the bin folder to start or stop the service.

2. Configuration

The following items need to be configured in the Auth server’s wsrflite.xml file:

  • UFTPD server(s) to be accessed

  • User authentication: configure the Auth server to authenticate users using username/password, ssh key or via Unity

  • Attribute sources (XUUDB, map file, …) for assigning local attributes like UNIX user name to authenticated users.

2.1. UFTPD server(s) configuration

For each UFTPD server that should be accessed, you’ll need to configure the relevant properties in the Auth service’s config file

The authservice.servers property is a list of server names. These should be meaningful, since users will need to use them, too. The other properties are used to configure the UFTPD command address and the UFTPD listen address. Please refer to the UFTPD configuration and manual for details.

  • host the IP address of the UFTPD listen socket

  • port the port of the UFTPD listen socket

  • commandHost the IP address of the UFTPD command socket

  • commandPort: the port of the UFTPD command socket

  • ssl: whether SSL is used to connect to the command socket. This MUST be set to its default of true in a production environment!

  • description: human-readable description of the UFTPD server


The listen socket address will be communicated to clients, who will attempt to connect to that address. Therefore, this has to be a public interface. For example, if you are running UFTPD behind a NAT router, you have to use the IP configured as the ADVERTISE_HOST in the UFTPD configuration.

For example, we want to configure two UFTPD servers named "CLUSTER" and "TEST":

  <!-- configured UFTPD server(s) -->
  <property name="authservice.servers" value="CLUSTER TEST"/>

  <!-- configuration for 'CLUSTER' server -->
  <property name="" value=""/>
  <property name="authservice.server.CLUSTER.port" value="64433"/>
  <property name="authservice.server.CLUSTER.commandHost" value=""/>
  <property name="authservice.server.CLUSTER.commandPort" value="64434"/>
  <property name="authservice.server.CLUSTER.ssl" value="true"/>
  <property name="authservice.server.CLUSTER.description" value="Production UFTPD server on CLUSTER"/>

  <!-- configuration for 'TEST' server -->
  <property name="" value="localhost"/>
  <property name="authservice.server.TEST.port" value="64433"/>
  <property name="authservice.server.TEST.commandHost" value="localhost"/>
  <property name="authservice.server.TEST.commandPort" value="64434"/>
  <property name="authservice.server.TEST.ssl" value="false"/>
  <property name="authservice.server.TEST.description" value="Test UFTPD server"/>

To allow the Auth server access to the command port of UFTPD, you need to add an entry to UFTPD’s ACL file. This is explained in the UFTPD manual.

2.2. User authentication

The Auth service is a RESTful UNICORE service, and as such all the configuration details for a UNICORE/X server apply here as well.

We summarise the most important details, please refer to the UNICORE/X manual if you want to learn about further options.

The enabled authentication options and their order are configured in wsrflite.xml or uas.config

<property name=""
          value="PASSWORD | SSHKEY | UNITY"/>

The available options can be combined.

2.2.1. Username-password file

To use a file containing username, password and the DN,

<property name=""

<property name=""
<property name=""

This configures to use the file conf/rest-users.txt. The file format is

# on each line:
# username:hash:salt:DN
demouser:<...>:<...>:CN=Demo User, O=UNICORE, C=EU

i.e. each line gives the username, the hashed password, the salt and the user’s DN, separated by colons. To generate entries, i.e. to hash the password correctly, the md5sum utility can be used. For example, if your intended password is test123, you could do

$> SALT=$(tr -dc "A-Za-z0-9_" < /dev/urandom | head -c 16 | xargs)
$> /bin/echo "Salt is ${SALT}"
$> /bin/echo -n "${SALT}test123" | md5sum

which will output the salted and hashed password. Here we generate a random string as the salt. Enter these together with the username, and the DN of the user into the password file.

2.2.2. Unity SAML authentication

You can also hook up with Unity, passing on the username/password and retrieving an authentication assertion.

<property name=""

<property name=""
<property name=""
<property name=""

2.2.3. Unity OAuth bearer token authentication

To have Unity check the client’s OAuth token:

<property name=""
<property name=""
<property name=""
<property name=""

2.2.4. SSH Key validation

This authentication option is based on the validation of a token using the user’s public SSH key. The token will be checked, and if successful, the user will be assigned a distinguished name for later authorisation.

SSH keys are read from the user’s ~/.ssh/authorized_keys file, but can also be managed manually in a dedicated ssh keys file.


SSH key validation will not work for users on Windows, since the UFTP stand-alone client does not yet support SSH keys on Windows. We recommand adding a username/password option for Windows users.

SSH key validation is configured as follows:

<!-- authN -->
<property name=""

<!-- SSH key settings -->
<property name=""

When used like this, the users get an automatically assigned DN. By default, the DN is CN=<username>, OU=ssh-local-users. Using the "PAM attribute source" (see below), authenticated users can be assigned the "user" role automatically without further configuration.

The user DN can be modified by configuring the DN template like this:

<!-- DN template used for SSH key mapping. The %s is replaced by the username -->
<property name=""
          value="CN=%s, OU=ssh-local-users"/>
Manual SSH key mapping

If you want to map ssh keys to DNs manually, a file is used. Entries in the file override the keys read from ~/.ssh/authorized_keys.

<!-- configure SSH keys file -->
<property name=""

It contains the mappings and the ssh public keys in a simple format:

# Example SSH users file used with the SSHKEY authentication method

#format: username:sshkey:DN
demouser:ssh-rsa keydata_was_omitted testkey:CN=Demo User, O=UNICORE, C=EU

The SSH key is in the same one-line format used in the .ssh/authorized_keys file.

You can enter multiple lines per username, to accommodate the case that a user has different SSH keys available. For example

# Example SSH users file with multiple keys per user

demouser:ssh-rsa <...omitted keydata...>:CN=Demo User, O=UNICORE, C=EU
demouser:ssh-dss <...omitted keydata...>:CN=Demo User, O=UNICORE, C=EU
otheruser:ssh-rsa <...omitted keydata...>:CN=Other User, O=UNICORE, C=DE

2.3. Attribute sources

Please refer to the UNICORE/X manual on how to set up and configure attribute sources like map file or XUUDB.

To use the automatic SSH key mapping, please use this config snippet

  <!-- attribute source(s) -->
  <property name="" value="PAM"/>
  <property name="" value="MERGE_LAST_OVERRIDES"/>

  <property name="" value=""/>

In this way users that successfully authenticate with their SSH key get the "user" role automatically.

2.4. Attribute mapping

After successful authentication, the user is assigned attributes such as the Unix account and group which is used for file access.

The Unix account and group are taken from the configured attribute sources (e.g. XUUDB). Since it is possible to access multiple UFTPD servers using a single Auth server, it may be required to configure different attributes for different UFTPD servers. This is easily possible using the file attribute source (map file).

It is also possible to control which directories and files a user can access. This is done by configuring the allowed and/or the forbidden file path patterns.

The following map file entry gives a full example.

  <entry key="CN=Demo User,O=UNICORE,C=EU">
     <attribute name="role">

     <!-- default Unix account and group -->
     <attribute name="xlogin">
     <attribute name="group">

      <!-- UFTP specific attributes -->

      <attribute name="uftp.CLUSTER.xlogin">
      <attribute name="">

      <!-- optional rate limit (bytes per second) -->
      <attribute name="uftp.CLUSTER.rateLimit">

      <!-- optional includes -->
      <attribute name="uftp.CLUSTER.includes">
      <!-- optional excludes -->
      <attribute name="uftp.CLUSTER.excludes">


Here, the "CLUSTER" must match a configured UFTPD server, see also [auth_uftpd]. Available attributes are

  • role: the UNICORE role, usually this will be user

  • xlogin, group: Unix account and group to be used for this user

  • rateLimit: the number of bytes per second (per transfer) can be limited. You can use the units "K", "M", and "G" for kilo, mega or gigabytes, respectively.

  • includes: file path patterns (separated by ":") that are allowed. If not given, all the user’s files can be accessed.

  • excludes: file path patterns (separated by ":") that are forbidden. If not given, no files are explicitely excluded.

3. Checking the installation

You can check that the server works using a simple HTTP client such as curl to access the Auth server’s base URL, provided you have configured username/password authentication.

The command

$> curl -k https://<host:port>/rest/auth \
   -H "Accept: application/json" \
   -u username:password

should produce a JSON document containing information about the configured UFTPD servers and their status, such as

{"TEST": {
  "availableGroups": [
  "description": "Default UFTPD server for testing",
  "gid": "users",
  "href": "https://localhost:9000/rest/auth/TEST",
  "rateLimit": 209715200,
  "status": "OK [connected to UFTPD localhost:64435]",
  "uid": "somebody",

If you do not get any output, try adding the "-i" option to the curl command, most probably the username/password is incorrect.

4. Installing the Auth server in an existing UNICORE/X server

This option is interesting if you are already running a UNICORE installation and want to allow your users the option of using the standalone UFTP client. This requires UNICORE/X version 7.10 or later!

  • copy the authserver-*.jar file to the lib directory of UNICORE/X

  • copy the XACML policy file 30uftpAuthService.xml to the conf/xacml2Policies directory

  • edit wsrflite.xml (or uas.config) and setup RESTful user authentication and UFTPD details as described above

5. Running the Auth server behind a UNICORE Gateway

If you want to place the Auth server behind a UNICORE gateway for easy firewall transversal, you need to configure an entry in the Gateway connections config file, and set the container base URL property ('container.baseurl') in the Auth servers wsrflite.xml. This option is also useful when the server’s listen address differs from the publicly accessible server address, such as when running the Auth server behind a NAT firewall.